USB Boot not working for E5491 with symentec Ghost 11.5
I did create an USB Boot for E5491 but I am getting following error
when i tried to boot with it Error:
Unable to locate the PCI LAN Adapter/ The following are possible causes:
1. The system may not support the PCI bus.
2. The PCI adapter may not be properly installed in a slot.
3. Some of the PCI adapter resources in configuration space may be invalid. Check for possible errors listed above and run adapter diagnostics.
Failure: Driver did not load, NDIS environment invalid.
I did download the driver for MS-DOS from intel ® Ethernet Connection I219-LM , PRODOS.exe 23.5.2 I made following changes on to the USB boot but still i am getting the same error any help very much appreciated as we have an bulk order for E5491
Autoexec.bat
@echo off
prompt $p$g
\net\netbind.com
MOUSE.COM
cd \ghost
echo Loading..
GHOST.EXE -fni
Also remember to add the driver name to the protocol.inf, so it looks like this:
[protman]
drivername=PROTMAN$
[pktdrv]
drivername=PKTDRV$
bindings=nic
intvec=0x60
chainvec=0x66
[nic]
drivername = e1000$