I do not need a solution (just sharing information)
I found this article and it helped with my previous post:
https://support.symantec.com/en_US/article.tech110...
The key part was This :For Ghost Console tasks, use the -jaddr=ipaddressofconsole switch in the Advanced button on the Clone tab of your task to specify the IP Address of the Ghost Server. If specifying the IP Address of the Ghost Server in the task gives the same 10030 error message, there is a likely multicast configuration issue on your network.
When I put that in for example like this -CLONE,MODE=RESTORE,SRC=@MC"BS1",DST=1 -sure -jaddr=10.99.95.3,
IT WORKS GREAT!
0